Chain Dialing - Uniden DCT5280 Owner's Manual

Chain Dialing

[ 44 ] P H O N E B O O K
L M
3) Press volume/ or
(see "Viewing the Phonebook" on page 42).
a. Editing the Stored Data
1) When the phonebook location to be edited appears,
press the EDIT soft key. "
2) Follow the steps 4 to 8 under "Storing Phone
Numbers, Names, Distinctive Rings, and Speed Dial"
on page 39 to complete the editing operation.
3) Press the OK soft key. You will hear a confirmation tone.
b. Deleting the Stored Data
1) When the phonebook location to be deleted appears, press the DELETE soft key.
"
L
2) Press volume/ to move the pointer to "
3) Press the OK soft key. You hear a confirmation tone. "
The memory locations in the handset are not limited to phone numbers. You can also
store a group of numbers (up to 20 digits), that you need to enter once your call
connects. This is referred to as Chain Dialing.
An example of this is a bank account number. Store a special number in the phonebook
location (refer to "Storing Phone Numbers, Names, Distinctive Rings and Speed Dial"
on page 38). Once you have called your bank, and when you are prompted to enter the
account number, just as you do when viewing the phonebook location, view the special
number, then press the DIAL soft key.
, or the number keypad to view the phonebook locations
" appears.
" appears.
".
" appears in the display.