Setting Up The Menu - Uniden DCT5260 Owner's Manual

DCT5260_OM 10/1/02 5:30 PM

Setting up the Menu

[ 20 ] G E T T I N G S T A R T E D
Page 20
SYSTEM RESET
This menu is used to clear the handset ID from the base, or the base ID from the base.
Submenu name
Deregister HS Clear the handset ID from the base. Use this menu, for example when
you change the digital security code (see page 25).
Replacing Base Clear the base ID. Use this menu, for example, if you replace
the base of the same model. (see page 25).
How to Use the Menu Function
1) Press the MENU soft key in the standby mode.
L M
2) Press or to move the pointer to a desired main
menu (DirectLink Mode, Handset Setup, Global Setup,
and System Reset).
3) Press the OK soft key to enter the submenu. To return
to the previous menu screen, press the BACK soft key.
L M
In the submenu, or is used to select an item.
Press the the OK soft key to confirm your setting.
To return to the main menu, press the BACK soft key. For detailed
instructions, see the following sections for the desired submenu.
4) To exit the menu, press end.
• If any of the following occurs during the menu operation, the operation will be cancelled.
- Press end.
- Press talk/flash or speaker.
- Charge the handset.
- Receive an outside/intercom call or page.
• If the handset remains idle for 30 seconds,
the phone will return to the standby mode.
Description
S U N 1 1 : 5 9 P
H a n d s e t # 1
N e w : 1 0 0
MENU CID RDL PB
MENU
D i r e c t L i n k M o d e
H a n d s e t S e t u p
G l o b a l S e t u p
BACK OK