Table of Contents
Advertisement
UP409ZH (WDECT2315-2) OM
12/22/05
SETTING UP THE MENU
Entering the Menu
1) Press the
/del key in standby mode.
2) Use
/vol/
or
/vol/
a desired main menu (DirectLink Mode, Room Monitor,
Handset Setup, Global Setup, and System Reset).
3) Press
to select the desired main menu.
4) Use
/vol/
or
/vol/
to enter.
In the submenu, use
/vol/
to confirm your selection. For detailed instructions, see the following sections for the
desired submenu.
5) To exit the menu, press
DirectLink Mode
Entering the Two Way Communication between the Handsets
Anywhere without the Base
1) Enter the DirectLink Mode menu (see "Entering the
Menu" on page 13). To enter DirectLink mode
press [SELECT] appears.
2) Press
to enter the DirectLink mode. You will
hear a confirmation tone, and DirectLink Mode Complete appears.
To adjust ringer volume, press
ringer volume (off, low, or high).
3) To return back to the normal mode, exit the DirectLink mode. To exit the DirectLink
mode, press
/del, and then
DirectLink Mode Cancel appears.
3:26 PM
Page 13
to move the pointer to
DirectLink Mode
Room Monitor
Handset Setup
to select a desired submenu, and then press
or
/vol/
to select an item. Press
or place the handset to the cradle.
To enter
DirectLink mode
press [SELECT]
/vol/
or
/vol/
to select one of three
, or return the handset to the cradle.
Get other manuals https://www.bkmanuals.com
To back to the
previous screen,
press
/del.
[ 13 ]
Advertisement
Table of Contents
