Reconnecting The Scansnap To Another Wireless Access Point (Ix1500) - Fujitsu ScanSnap iX1500 Basic Operation Manual

Reconnecting the ScanSnap to Another Wireless Access Point
(iX1500)
Change the wireless access point, to which the ScanSnap is connected, to another one.
HINT
Using the ScanSnap Wireless Setup Tool enables you to obtain the Wi-Fi settings configured on your
computer and easily connect the ScanSnap to the same wireless access point as your computer.
For details, refer to "Connecting the ScanSnap to a Wireless Access Point by Using the ScanSnap
Wireless Setup Tool (iX1500)" (page
1.
On the touch panel of the ScanSnap, display the [Enter connection
information] screen.
1. Click the ScanSnap Manager icon
on the keyboard, and select [Quit] from the
a ScanSnap Manager exits.
2. Press
3. Press
4. Press [Access point connection] to display the [Access point connection] screen.
5. Press [Access point connect settings] to display the [Connection information configuration
method] screen.
6. Select [Select an access point].
7. Press the [Next] button to display the [Select network] screen.
8. From the list of wireless access points that appears, select a wireless access point that you
want to connect to.
9. Press the [Next] button to display the [Enter connection information] screen.
2.
Enter the information of the wireless access point to be used and press the
[Next] button.
The items which are displayed in the screen differ depending on the security protocol of the
wireless access point.
l To perform the authentication with a security key
Press the input field for [Security key] and enter the user name, and then press [OK].
l To perform the authentication with a client certificate
113).
on the touch panel to display the [Settings] screen.
to display the [Wi-Fi settings] screen.
Changing the Wireless LAN Connection Method (iX1500)
in the Dock while holding down the [control] key
"ScanSnap Manager Menu" (page
150
84).