Fujitsu ScanSnap iX1500 Basic Operation Manual page 423

a It clicks when it returns to its original position.
8.
Connect the power cable to the AC outlet, and turn on the ScanSnap.
9.
Reset the Roller Set counter.
1. Press
2. Press
3. Press [Check consumable status] to display the [Check consumable status] screen.
4. Press the [Reset] button.
5. When a message is displayed, press the [OK] button.
a The value of the current count for the [Current Count / Replacement Cycle] is set to "0".
on the touch panel to display the [Settings] screen.
to display the [Maintenance] screen.
423
Replacing Consumables for iX1500