Checking The Remaining Battery Power (Ix100) - Fujitsu ScanSnap iX1500 Basic Operation Manual

Checking the Remaining Battery Power (iX100)

The ScanSnap has a battery.
To check the remaining battery power, click the ScanSnap Manager icon
holding down the [control] key on the keyboard, and check [Battery] in the
Menu" (page 84).
HINT
l The remaining battery power can be checked also in the [ScanSnap Manager - Scanner and driver
information] window.
To open the [ScanSnap Manager - Scanner and driver information] window, select [ScanSnap
information] in the
l A notification window notifies you in the following cases:
- The remaining battery power is 10% or less.
- No battery power remains and the ScanSnap is turned off.
"ScanSnap Manager Menu" (page 84).
99
Turning the ScanSnap On or Off
in the Dock while
"ScanSnap Manager