Fujitsu ScanSnap iX1500 Basic Operation Manual page 219

5.
Click the [ ] button in the upper left of the window to close the ScanSnap
setup window.
6.
Place the document inside the Carrier Sheet.
1. Fold the document in half with the sides to be scanned facing out.
Fold it tightly and smooth out any creases.
2. Open the Carrier Sheet to bind the document.
Align the fold line with the right edge of the Carrier Sheet so that the document fits in the
upper right-hand corner of the Carrier Sheet.
HINT
Note that the front side of the Carrier Sheet has a black and white pattern at the top and a
thick vertical line in the upper right-hand corner.
7.
Place the end with the black and white pattern as the leading edge in the
direction of the arrow.
Secure the Carrier Sheet with the side guides to avoid skewing.
219
Scanning Documents with iX500