Fujitsu ScanSnap iX1500 Basic Operation Manual page 184

7.
Click the [ ] button in the upper left of the window to close the ScanSnap
setup window.
8.
Load documents in the ScanSnap.
1. Align the edges of the documents.
2. Load the documents at the center of the ADF paper chute (cover).
ATTENTION
l Load all documents over one another above the pick roller (center). Documents that are not
loaded above the pick roller cannot be fed.
Pick Roller's Width
Incorrect
l Adjust the side guides to the widest document. If the side guides are not adjusted properly, a
paper jam may occur.
l Load smaller documents so that they can be scanned straight.
If the documents are skewed during scanning, the following problems may occur:
- Part of the document does not appear in the scanned image
184
Scanning Documents with iX1500