Fujitsu ScanSnap iX1500 Basic Operation Manual page 91

ATTENTION
For iX1500/iX500/iX100/S1300i/S1100i, with some computers, the initialization of the ScanSnap
may be performed several times when the computer is started up depending on some
computers.
HINT
l It may take more time for the ScanSnap Manager icon in the Dock to change to
depending on computer performance, operating environment, or loading, for example, when
many software programs are running at the same time.
l When the ScanSnap is turned on, a notification window notifies you of the ScanSnap's
communication status.
To disable notifications of the ScanSnap's communication status, change the setting in the
following procedure:
1. Click the ScanSnap Manager icon
on the keyboard, and then select [Preferences] from the
(page 84).
a The [ScanSnap Manager - Preferences] window appears.
2. Clear the [Notify of the communication status] checkbox in the [Status Display] list.
in the Dock while holding down the [control] key
"ScanSnap Manager Menu"
91
Turning the ScanSnap On or Off