Using A Dns Server For The Internet Connection (Ix1500) - Fujitsu ScanSnap iX1500 Basic Operation Manual

Using a DNS Server for the Internet Connection (iX1500)

When an IP address is set for the ScanSnap, the setting for using a DNS server can be configured
on the ScanSnap.
1.
Click the ScanSnap Manager icon
[control] key on the keyboard, and select [Quit] from the
Menu" (page
a ScanSnap Manager exits.
2.
Press on the
screen.
3.
Press
4.
Press [Access point connection] to display the [Access point connection]
screen.
5.
Press [DNS Server] to display the [DNS Server] screen.
6.
Turn on [Use of DNS Server].
7.
Press the input field for [Primary DNS], enter the IP address of the primary
DNS server, and then press [OK].
8.
Press the input field for [Secondary DNS], enter the IP address of the
secondary DNS server, and then press [OK].
9.
Press to return to the home screen.
84).
touch panel
to display the [Wi-Fi settings] screen.
in the Dock while holding down the
of the ScanSnap to display the [Settings]
165
Access Point Connect Settings (iX1500)
"ScanSnap Manager