Table of Contents
Advertisement
General
Equipment Symbols
Service Information
Service Requirements
Equipment Identification
Revision G
Introduction: Service Information
Failure on the part of the responsible individual, hospital, or
institutional users of this equipment to implement a satisfactory
maintenance schedule could cause equipment failure and health
hazards.
To ensure patient safety, use only parts and accessories manufactured or
recommended by GE Healthcare.
Contact GE Healthcare before connecting any devices to this equipment
that are not recommended in this manual.
Parts and accessories used must meet the requirements of the applicable
IEC 60601 series safety standards, and/or the system configuration must
meet the requirements of the IEC 60601-1-1 medical electrical systems
standard.
The use of accessory equipment not complying with the equivalent safety
requirements of this equipment may lead to a reduced level of safety of
the resulting system.
Considerations relating to the choice include:
Use of the accessory in the patient vicinity.
Evidence that the safety certification of the accessory has been
performed in accordance to the appropriate IEC 60601-1 and/or IEC
60601-1-1 harmonized national standard.
See the MAC 600 operator's manual for information about the symbols
used on this product and its packaging.
Refer equipment servicing to GE Healthcare authorized service
personnel only. Any unauthorized attempt to repair equipment under
warranty voids that warranty. It is the user's responsibility to report the
need for service to GE Healthcare or an authorized agent.
Every GE Healthcare device has a unique serial number. The serial
number appears on the device label and is formatted as shown.
TM
MAC
600
2047426-002
1-5
Advertisement
Table of Contents
