Reworking The Power Supply (Class Ii To Class I) - GE MAC 600 SPY Service Manual

Reworking the Power Supply (Class II to Class I)

Revision G
Maintenance: Preparing System for FRU Replacement
The MAC600 Class II Power Supply (PS) FRU P/N 2047328-001 is
obsolete. The new power supply is qualified as Class I and the P/N is
2047328-002. In order to use the Class I power supply in the MAC600,
the safety classification of MAC600 device needs to change from Class II
to Class I .
Legend
Depending on the Serial number of the device different levels of rework
are required. See the following table for further details.
NOTE
All MAC 600 shipments to China are Class I. Therefore, further
rework is not required. For China, see
Supply Medical Class I (For China Only)"
If Serial Number is:
less than or equal to
SF713346059PA
between SF713346060PA
and SF713496708PA
equal to or greater than
SF713500001PA
TM
MAC 600
2047426-002
Table 4-6. Power Supply Labels
1 Class II Power Supply label
2 Class I Power Supply label
"2066456-001 FRU - Power
on page 5-9.
1. "Earth Cable Routing"
2. "Changing the Product Label"
3. Change the Power Supply FRU (P/N
2047328-002).
1. "Changing the Product Label"
2. Change the Power Supply FRU (P/N
2047328-002).
1. Change the Power Supply FRU (P/N
2047328-002).
Description
Then Perform:
on page 4-12
on page 4-13
on page 4-13
4-11