Eject Button - HP 9000 V-Class Operator's Manual

Indicators, switches, and displays
Operator panel
Tape
(Activity)
LED (green)
Any Flashing slowly
Any On
Flashing slowly Off

Eject button

Push the eject button to remove cartridges from the tape drive. The drive
performs the following Unload sequence:
1. The tape is rewound to Beginning of Partition (BOP) for Partition 0.
2. If the tape is write-enable, the copy of the Tape log is written back to
3. The tape is then rewound to Beginning of Media (BOM), unthreaded
CAUTION Do not push the eject button while the LED is flashing. If you do, the
operation in progress is aborted and the cartridge is ejected, possibly
causing a loss of data.
20
Clean
(Attention)
LED (amber)
Media caution signal. Indicates that a cartridge is
near the end of its life or that the heads need
cleaning.
Fault
Power-on (starts with two steady lights)
tape.
from the mechanism, and ejected.
Meaning
Chapter 2