Table of Contents
Advertisement
Firmware (OBP and PDC)
HP mode boot menu
Command
PAth [PRI|ALT|CON] [path]
PDT [CLEAR|DEBUG]
PIM_info [cpu#]
[HPMC|TOC|LPMC]
RESET [hard|debug]
RESTrict [ON|OFF]
SCSI [INIT|RATE] [bus slot val]
SEArch [path]
SECure [ON|OFF]
TIme [cn:yr:mo:dy:hr:mn[:ss]]
VErsion
48
Description
Displays or sets primary, alternate, console, and
keyboard hardware paths. Keyboard path cannot
be modified.
Displays or clears Page Deallocation Table (PDT)
information. For use by service personnel only.
Displays Processor Internal Memory (PIM)
information for current or any CPU.
Resets the system state.
Displays or sets restricted access to Forth mode.
Displays or sets SCSI controller initiator ID or
transfer rate.
Displays pathnames for devices with bootable
media in the system.
Displays or sets secure boot mode. If secure mode
is set, the boot process cannot be interrupted.
Only useful if autoboot is on; the system will
autosearch and autoboot.
Displays or sets the realtime clock.
Displays the internal firmware versions.
Chapter 4
Advertisement
Table of Contents
