Controlling The Console Remotely - HP 9000 V-Class Operator's Manual

Teststation
Using the console

Controlling the console remotely

You can perform system maintenance or diagnostics remotely by
assuming control of the console from a remote terminal. Upon gaining
control of the console, you have write access to that window.
Only one window can be active at a time.
To assume control of the console, complete the following steps:
Step 1. Remotely log in to the teststation as sppuser (default password: spp user)
with the following command:
hostname
rlogin
sppuser
login:
Password:
Step 2. Access the system console with the following command:
/spp/scripts/sppconsole
At this point you are in spy mode, meaning that you can only monitor
what is going on at the system console. If you try to enter a command the
following message is displayed:
[read-only -- use '^Ecf' to attach, '^Ec?' for help]
Step 3. Assume control of the console by attaching to it with the following
command:
Ecf
CTRL-
Step 4. You can relinquish control of the console and return to spy mode with the
following command:
Ecs
CTRL-
Step 5. Exit the session with the following command:
Ec.
CTRL-
36
spp user
Chapter 3