Bosch OptiMUM MUM9 Series Instruction Manual page 8

en Parts and operating controls
Tools
X Fig. A
Professional flexible
beating whisk
For stirring dough, e.g. cake mixture
or mousse. For folding in cream or
beaten egg white.
Professional stirring whisk
For beating egg white, whipping
cream and stirring light dough,
e.g. sponge mixture.
Kneading hook
For kneading heavy dough
(e.g. yeast dough) and for folding in
ingredients which are not supposed
be chopped (e.g. raisins, chocolate chips).
Recommended speeds
For folding in and mixing different
z
ingredients gently (e.g. folding in
beaten egg white)
1-2 For stirring and mixing ingredients
3 For kneading heavy dough with the
kneading hook
5-7 For stirring and whipping ingredients
(e.g. whipped cream) with the
professional flexible beating whisk
or the professional stirring whisk
ü For using the tools with
SensorControl Plus X "Using
SensorControl Plus" see page 12
Re-adjustment of tools
The appliance is factory-set so the
professional stirring whisk almost touches the
bottom of the bowl to ensure that ingredients
are mixed together perfectly. If the tools
touch the bottom of the bowl or are too far
from it, the gap can be easily corrected.
X "Re-adjustment of tools" see page 16
Swivel arm
X Fig. C
The swivel arm is moved up to
insert or to remove a tool or the bowl.
The swivel arm features an "EasyArm Lift"
function, which supports the upward
movement of the swivel arm.
8
Bowl and cover
X Fig. D
The appliance comes with a special bowl,
which is securely attached to the base unit
through insertion and rotation. The cover
is secured to the swivel arm and opens
automatically when the swivel arm is raised.
Inserting and removing tools
X Fig. E
The tools are equipped with a lever on the
protective cap, designed to make them
easy to remove.
Insert tool: Align the lever with the front
and insert the tool in the main drive until it
locks into place. The drive is then covered
by the protective cap.
Remove tool: Align the lever to the front
and press down until the tool is released.
Take the tool out of the drive.
Cable reel
X Fig. A
Depending on the model: The
appliance is equipped with an automatic
cable reel. Pull out the power cord in one
go to the required length (max. 125 cm) and
slowly release; the cord is locked.
Reduce cable length: Pull gently on the
cord and allow it to wind up to the required
length. Then gently pull the cord again and
slowly release; the cord is locked.
Important: Do not push the cord in by
hand. If the cord jams, pull out the cord all
the way and then allow it to wind up again.
Cable storage
compartment
X Fig. A
Depending on the model: The appliance
is equipped with a cable storage
compartment. The length of the power cord
can be adjusted as required by pulling it out
or pushing it back.
Safety systems
The appliance has various safety systems.
X "Safety systems" see page 17