Using The Scales - Bosch OptiMUM MUM9 Series Instruction Manual

– Do not start SensorControl Plus a
second time with ingredients which have
already been processed.
Example: Making beaten egg
white with SensorControl Plus
X Image sequence J
1. Prepare the base unit and insert the
professional stirring whisk.
2. Press the release button and push the
swivel arm down until it locks into place.
3. Plug the mains plug into the mains.
"OptiMUM" appears on the display.
4. Separate the eggs (2-12 eggs).
5. Press button D. "CREAM" appears on
the display.
Note: Models without a scale display
"CREAM > 300 ml". Press button D
again. "CREAM > 700 ml" appears on the
display.
6. Press button D. "EGG WHITE" appears
on the display.
7. Add the egg white to the bowl. "TURN
SWITCH TO M/A" appears on the display.
8. Turn the rotary switch to ü and hold
in this position.
9. After a short while the rotary switch is
automatically fixed in this position and
remains on ü after being released.
10. "SENSOR CONTROL PLUS" appears
on the display. SensorControl Plus
monitors the processing.
11. Once the pre-programmed consistency
has been achieved, an acoustic signal
will sound and processing will stop.
"FINISH" appears on the display.
Note: Setting the acoustic signal
X "Settings" see page 9
12. The rotary switch automatically switches
to y. "OptiMUM" appears on the
display.
13. Disconnect the mains plug.
14. Processing with the "EGG WHITE"
function is ended.
15. Clean all parts immediately after use.
X "Cleaning and maintenance" see
page 15

Using the scales

Depending on the model in question, the
appliance may be equipped with scales.
The following applications are possible:
– Weighing the added ingredients
(either each ingredient individually or all
ingredients together).
– Pre-setting a desired weight and
counting down until sufficient ingredients
have been added (with audible
information signals).
Important:
– The appliance has 4 weight sensors
in the feet. The scales only supply
the correct results if all of the feet are
standing on a solid and level surface.
Do not put any cloths or other items
underneath.
– Do not slide the appliance about on
the work surface as this may impair the
functioning of the scales. To move the
appliance, lift it.
– After switching on or resetting the
scales, they are calibrated for a brief
moment (tare). During this process, do
not touch the appliance or place any
items on top of it (e.g. wooden spoon,
tea towel etc.).
– Ensure that measuring jugs or
packaging are not lying on top of the
appliance (e.g. on the edge of the filling
shaft).
Weighing ingredients
X Image sequence K
1. Prepare the base unit.
2. Plug the mains plug into the mains.
"OptiMUM" appears on the display.
3. Press button C and don't touch the
appliance again.
Individual dashes appear one after each
other on the display during calibration:
"– – – – –" (tare).
4. "0 g" or "0.00 lb" appears on the display
(depending on the setting). The scales
are ready.
5. Add ingredients. The scales display the
weight.
Using the scales en
13