Table of Contents
Advertisement
8
Installation
3 Route the LTM power cable through the side of the electronics cover and connect it to the
Module 1 connections
Column module cable
Transfer line cables
(interchangeable)
Fan cable
Module 2 connections
Power cord
Communications cable
Figure 42.
Table 12 Electronics board connectors
Column module
Transfer lines
Fan cable
Power cord
Communications cable
4 Route one end of the long gray communications cable through the left side of the
5 Route the other end of the communications cable around the left side of the GC. Route the
User Guide
electronics board at J1. See
LTM electronics board cable connections
electronics module as shown in
cable up through an open slot in the upper back panel, typically through slot 3 (Aux Gas) or
Figure 42
and
Table
12.
P2
P3
P4
P5
P6
P7
P8
P9
Module 1
Module 2
P2
P6
P3 and P4
P7 and P8
P5
P9
Other connections
J1
P1
Figure
42. Connect to the board at P1.
P1
J1
87
Advertisement
Table of Contents
