Table of Contents
Advertisement
3
Column Modules
4 Loosen the two screws that secure the column module cover, then tilt the cover and
5 Remove the two screws that secure the column module to the transfer line module.
Figure 36.
6 Gently slide the column module off of the transfer line module.
7 Reinstall the column module cover. Be careful not to clip the heater wires.
8 If not re-using the transfer line module immediately, install the two column module
Note that the installed unions remain on the transfer line module.
User Guide
remove.
Removing the mounting screws
•
Be careful to avoid damaging the column ends.
mounting screws into the transfer line module for safe keeping.
57
Advertisement
Table of Contents
