Table of Contents
Advertisement
3
Column Modules
11 If installing another LTM column module, do so now. If you will not use the open slot(s),
12 Exit maintenance mode. Select Finished.
The CFT fittings on the In and Out segment columns can be installed into another CFT fitting
as-is.
If storing the column module, protect the column ends and CFT fittings.
User Guide
restore the GC to operation as follows:
a Remove or reconfigure the GC columns as needed.
b Fill the open slots in the LTM oven door with insulation. (See
Replacement
Parts".)
c Using a T-10 Torx driver, loosen the fan bracket mounting screws and remove the fan
bracket. Disconnect the fan from the electronics board.
d Reinstall the slot cover(s).
e Close the LTM electronics enclosure.
"Consumables and
55
Advertisement
Table of Contents
