8
Installation
4 Install 3 standoffs and the G3450-00068 LTM side panel support bracket onto the GC.
Figure 41.
5 Install the new metal side panel and secure in place with 4 M4 x 6 mm screws
84
•
If using an MS or MSD, use G6578-00029, which includes a through-hole for the MS
transfer line.
•
Install one 29 mm long standoff provided in the kit into the bottom threaded hole as
shown in
Figure 41
below.
•
Install the LTM panel mounting post bracket using two M4 x 6 mm long screws.
•
Install the two 13 mm standoffs at the top.
Installing the left side panel standoffs
(0515-0684).
•
If a PAL autosampler is installed, instead use two 16 mm long flat head screws provided
in the kit (0515-1034).
User Guide