Menu Tree; Figure 5-3. Total Access 1248 Menu Tree - ADTRAN Total Access 1248 Installation And Maintenance Practice

MENU TREE

There are a number of menu screens designed to aid in the maintenance and troubleshooting
of the Total Access 1248 system. The Total Access 1248 system menu tree (see
visual map that can be used to locate configuration information and provisioning options.
1. Configuration
Total Access 1248
2. ATM Circuit Management
3. System Management
4. DSL Menus
5. System Alarms
6. System Event Log
7. Contact Information
8. Enter TL1 Mode
9. Logoff
61179641L5-5C
Unit Name
CLEI Code
Part Number
Serial Number
Product Revision
Software Revision
1. ATM PVC/PVP Management
2. ATM Traffic Parameter Defaults
3. Restore ATM Defaults
4. ATM Performance
1. Password Control
2. Baud Rate
3. Expansion Menu
4. Download New Code
5. Restore Factory Defaults
6. Reset System
7. Self Test Results
System Uptime
1. ADSL Provisioning
2. ADSL Status
3. ADSL Performance
4. DELT Menus

Figure 5-3. Total Access 1248 Menu Tree

Note: These options are not accessible from the
Total Access 1248 client. For more information,
refer to the Total Access 1248 host unit.
1. Set Passwords
2. Allow SNMP Security Management
3. Set Menus Idle Logout Time
4. Set TL1 Menus Idle Logout Time
5. Set TL1 Inband Idle Logout Time
6. Restore Default Passwords
1. 9600
2. 19200
3. 38400
Mode
2. Clear Packet Counts
1. Y-Modem (Craft Port)
Note: These options are not accessible from the
Total Access 1248 client. For more information,
refer to the Total Access 1248 host unit.
Menu Tree
Figure 5-3) is a
1. Download Network Module Code
2. Exit
5-7