Technical Description - Dometic CAM1000 Installation And Operating Manual

CAM 1000 / BSC 01
5

Technical description

5.1 Function description
The camera image is evaluated via the control unit in the camera. Objects moving in the same
direction as the vehicle are detected and marked on the monitor with a movement arrow.
The arrow moves with the detected object and serves as an optical signal. Optionally, an acoustic
warning signal can be added.
The system includes the M75LXAHD monitor, which is mounted on the right A-pillar and provides
the driver with images of the situation next to the vehicle.
The CAM1000 / BSC01 camera has the following features:
• CMOS camera with moving object detection function
• Evaluation of the signal edge when the object enters the active area of the image
• Defined active and inactive image area
• Minimization of messages by exclusion of irrelevant objects (filtering by direction of movement)
• Optical signaling by dynamic arrow indicator
• Acoustic warning signal (optional)
• Speed-dependent activation via GPS receiver
• Automatic activation of the monitor
5.2 Display elements of the camera image
Symbol
EN
Function
Active area
Reference line
Dynamic arrow
indicator
GPS
Description
The marking of the active area appears for about
6 seconds after the ignition is activated. It indi-
cates the area in which the camera detects an
object.
The reference line appears permanently. It must be
positioned parallel to the right vehicle contour.
The dynamic arrow indication starts at the
detected object and moves in the direction of
travel of the vehicle (from rear to front).
Green symbol: full function
– Camera is working correctly
– GPS reception available
Yellow symbol: Faulty GPS reception
The system is active but the acoustic warning
signal is off until a better GPS reception is
obtained.
Red symbol: no object detection available
Technical description
7