Troubleshooting; Caring For And Maintaining The Cam1000 / Bsc01; Warranty - Dometic CAM1000 Installation And Operating Manual

CAM 1000 / BSC 01
9

Troubleshooting

Fault
The device shows no
function.
"NO SIGNAL" is dis-
played on the monitor.
A yellow GPS icon
appears on the monitor.
A red GPS icon appears
on the monitor.
10

Caring for and maintaining the CAM1000 / BSC01

A
NOTICE! Damage hazard
Do not use sharp or hard objects or cleaning agents for cleaning as these may damage
the product.
➤ Occasionally clean the product with a damp cloth.
11

Warranty

The statutory warranty period applies. If the product is defective, please contact the
manufacturer's branch in your country (see dometic.com/dealer) or your retailer.
For repair and warranty processing, please send the following items:
• Defect components
• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault
EN
Cause
The black or red cable for the
voltage supply are not making
contact.
The system plug is not con-
nected or not correctly plugged
into the control electronics.
No video signal present. Loose
contact in the plug connector of
the camera cable
The camera is defective.
GPS reception is faulty.
No object detection is available.
Troubleshooting
Solution
Check that the connections are
secure.
Check the system plug and make
sure that it locks into place.
Check that the connections are
secure.
Contact an authorized service
center to replace the camera.
The system is active but the
acoustic warning signal is off until
a better GPS reception is
obtained.
Check that the connections are
secure.
11