Removal Of The Left Side Cover - Barco DP2K-S Series User And Installation Manual

15.4 Removal of the left side cover

W
ARNING
cedure.
Necessary tools
7mm flat screwdriver.
How to remove the left side cover?
1. Release the small dust filter assembly from the front side of the projector. Use 7mm flat screw driver to loosen the captive screw
(reference 1 image 15-4) of the small dust filter assembly.
Note: The left side cover is partial captured by the sheet metal of the small filter assembly. For that, this filter has to be (partially)
removed first.
1
Image 15-4
2. Loosen the five captive screws (reference 2 image 15-5) of the left side cover using a 7mm flat screwdriver.
3. Remove the left side cover from the projector.
1
Image 15-5
R5977692 DP2K-S SERIES 10/12/2012
:
Switch off the projector prior to start with this procedure, unless otherwise specified in the pro-
15. Removal and installation of the projector covers
2
121