Lens Shift, Zoom & Focus - Barco DP2K-S Series User And Installation Manual

6. Lenses & Lens selection
6.5 Lens shift, zoom & focus
Motorized lens adjustment
The DP2K-S series projector is equipped with a motorized lens shift and zoom & focus functionality.
Maximum shift range
The lens can be shifted with respect to the internal optics of the projector (DMD) which results in a shifted image on the screen
(Off-Axis). A 100% shift means that the centre point of the projected image is shifted by half the screen size. In other words, the
centre point of the projected image falls together with the outline of the image in an On-Axis projection. Due to mechanical and
optical limitations the shift range is limited as well.
All DP2K lenses have a shift range of 50% up, 50% down, 30% left, and 30% right. This range is valid for all throw ratios. Within
these shift ranges the projector and lens perform excellently. Configuring the projector outside these shift ranges will result in a slight
decline of image quality.
+50%
-30%
L
-50%
Image 6-10
P DMD.
F Field of view.
It's mechanical possible to shift outside the recommended field of view (±90% UP/DOWN and ±50%
LEFT/RIGHT), but this will result in a decline of image quality depending on the used lens and the zoom
position of the used lens. Furthermore, shifting too much in both directions will result in a blurred image
corner.
How to shift the lens of the DP2K-S series projector ?
1. Use the up and down arrow buttons on the Local Keypad to shift the lens vertically and use the left and right arrow buttons
on the Local Keypad to shift the lens horizontally.
SHIFT SHIFT
Image 6-11
How to zoom in or out?
1. Use the "+" and "-" zoom buttons on the Local Keypad to zoom in or out.
ZOOM ZOOM
Image 6-12
How to focus?
1. Use the "+" and "-" focus buttons on the Local Keypad to focus the image on the screen.
FOCUS
Image 6-13
32
U
+30%
R
D
P
F
F SIDE VIEW
U
P
D
F
TOP VIEW
L
P
R
R5977692 DP2K-S SERIES 10/12/2012
+50%
-50%
-30%
+30%