Table of Contents
Advertisement
Projector covers
6.3 Removal of the operator side cover
Required tools
Torx screwdriver T20
How to remove
1.
Remove the front and rear cover of the projector.
2.
Release the two screws at the top of the side cover (reference 1). Use a T20 Torx screwdriver.
Image 6–5 Location of the set screws
3.
Slightly turn over the top side of the cover (reference 2).
4.
Lift up the operator side cover and remove it either through the front or the back of the frame (reference 3).
Image 6–6 Removing the side cover
84
R5914477 /00
XDM
1
Advertisement
Table of Contents
