Table of Contents
Advertisement
3. Getting started
3.2
Unpacking the projector
What you need to do?
Upon delivery, your projector is packed into a carton box upon a wooden/plastic pallet and secured with banding and fastening clips.
Furthermore, to provide protection during transportation, the projector is surrounded by foam. Once the projector has arrived at
the installation site, it needs to be removed from its carton box and wooden/plastic pallet in a safe manner without damaging the
projector.
How to unpack your projector?
1. Loosen the banding (reference 1 image 3-1) by pulling the free end of the banding loop in the clip.
Image 3-1
2. Lift up the carton box (reference 2 image 3-2) as a whole and remove it away from the projector package.
3. Take out the small box (reference 3 image 3-2) between the polystyrene foam on top of the projector. This box contains the
product documentation (manuals etc.).
4. Remove the polystyrene foam (reference 4 image 3-2) from the top of the projector.
Image 3-2
5. Open the plastic bag and lift the projector out of its packaging, using the handles provided in the projector base.
14
1
2
3
4
R5977692 DP2K-S SERIES 10/12/2012
Advertisement
Table of Contents
