Scheimpflug adjustment steps:
1. Sharpen the image at the bottom left corner of the screen by turning the upper left Scheimpflug adjustment nut (reference 1
image 10-6). As a result the focus in the center will fade a bit but that's normal.
Image 10-6
2. Sharpen the image at the top right corner of the screen by turning the lower right Scheimpflug adjustment nut (reference 3 im-
age 10-7).
Image 10-7
3. Sharpen the image at the bottom right corner of the screen by turning the upper right Scheimpflug adjustment nut (reference 2
image 10-7).
Image 10-8
4. Optimize the focus of the projected image in the center of the screen using the motorized focus control (Local Keypad).
FOCUS
Image 10-9
5. Repeat from step 1 until the projected focus pattern is as sharp as possible in the center, left, right, top and bottom of the screen.
6. Proceed with the procedure "Fixation of the Lens Holder front plate", page 62.
R5977692 DP2K-S SERIES 10/12/2012
1
F
3
2
F
10. Scheimpflug
F
F
F
61