Barco DP2K-S Series User And Installation Manual page 30

5. Physical installation
6
Image 5-7
4. Secure the AC power supply cord by fastening the cable gland (reference 3 image 5-7). Use a 24mm open end wrench
5. Install the cover of the main AC compartment. Fasten the two captive thumb screws (reference 1 image 5-8).
Image 5-8
6. Install the rear cover of the projector. See procedure "Installation of the rear cover", page 130.
26
5
3
4
1
2
R5977692 DP2K-S SERIES 10/12/2012