Removal Of The Left Cover - Barco HDQ 4K35 User And Installation Manual

Removal and installation of the projector covers
3. Tighten the 2 captive screws (2).
2 2
1 1
Image 8–11 Installing the back cover

8.9 Removal of the left cover

Required tools
Flat screwdriver
How to remove the left cover?
1. Release the 2 captive screws (1).
2. Release the 2 locks by sliding them towards each other (2). Pull the bottom side away from the projector.
3. Lift the cover up a little (3) and slide it out on the front side of the frame (5) while turning the back of the
cover away from the projector (4).
Image 8–12 Removing the left cover
90 R5905823 /05 HDQ 4K35
2 2
1 1
3
5
2 2
2 2
1 1
1 1
4
4
2 2
2 2