Cleaning The Reflector Of The Lamp House - Barco DP2K-S Series User And Installation Manual

14.8 Cleaning the Reflector of the Lamp House
When cleaning the Reflector?
Only clean the Reflector of the Lamp House in case it is really necessary. This means in case dust is clearly visible upon the surface
of the Reflector.
This procedure requires that the xenon lamp is removed from the Lamp House.
W
ARNING
Hazardous product. Irritating to eyes and skin. Always use in a well ventilated area. Vapors may cause drowsi-
ness and dizziness. Avoid contact with skin and eyes. In case of contact with the eyes, rinse immediately with
plenty of water and seek medical advise.
C
AUTION
Hazardous product. Lightly flammable. Always use in a well ventilated area. Keep away from sources of
ignitions. Do not smoke while working with isopropanol. Exclusive keep in original container tightly closed
at a cool, well ventilated and fireproof storage space.
Necessary tools
• Compressed air.
• Clean Toraysee cloth.
• Clean cotton cloth.
• Demineralized water.
• Isopropanol alcohol.
How to clean the Reflector of the Lamp House?
1. Try to blow away the dust with compressed air.
2. Is all dust removed from the Reflector?
If yes, stop this cleaning procedure.
If no, wipe off the dust of the Reflector. Use for that a clean Toraysee cloth.
Tip: Limit the number of wipe movements. This to protect the optical coating. It is better to wipe of the dust with one good
wipe movement then with 10 soft wipe movements.
3. Is all dust removed from the Reflector?
If yes, stop this cleaning procedure.
If no, wipe off the dust of the Reflector first with a clean cotton cloth and demineralized water and than with a clean Toraysee
cloth.
Tip: Use isopropanol alcohol instead of demineralized water to remove fingerprints.
C
AUTION
will result in irreversible damage of the projector.
R5977692 DP2K-S SERIES 10/12/2012
:
ISOPROPANOL ALCOHOL (200–661–7).
:
ISOPROPANOL ALCOHOL (200–661–7).
:
Never use a Lamp House which Reflector is cracked or has a damaged coating. Neglecting this
14. Maintenance procedures
115