Product Description
Printer Adjustment Mode
The EPSON Stylus COLOR 3000 allows users to adjust the items listed in the table below.
Pattern No.
Pattern 1
Pattern 2
Pattern 3
Pattern 4
Pattern 5
*
With an increment of 1/1440 inch
†
With an increment of 1/720 inch
Start
Press the Pause button while
turning on the printer.
The printer prints an instruction
sheet on how to select the language.
1.Move through the languages listed
by pressing the Micro Adjust ↑
button.
2.Select the language by pressing
the Pause button.
The printer prints an instruction
sheet on how to adjust the printer.
Do the
patterns need to be
adjusted?
NO
Turn the printer off to save the new settings in the EEPROM.
1-30
Table 1-34. Printer Adjustment Patterns
Uni-d adjustment at 400 cps *
Bi-d adjustment at 400 cps *
Bi-d adjustment at 200 cps *
Head gap adjustment between black and color to the cross
feed direction at 200 cps
Head gap adjustment between black and color to the cross
feed direction at 100 cps
1. Select the appropriate test by
pressing the Micro Adjust ↑ button.
YES
2. Press the Pause button.
The printer prints the test patterns.
Select the most closely aligned pattern
by pressing the Media Type button.
Press the Pause button to set the selected
pattern number.
Figure 1-12. Printer Adjustment Flowchart
Items
†
†
Are
YES
more adjustments
necessary?
NO
EPSON Stylus Color 3000 Service Manual