Tools - Epson STYLUS COLOR 3000 Service Manual

Disassembly and Assembly


Never remove an ink cartridge unless the manual specifies to do so.


When transporting the printer, remove all ink cartridges before turning off the printer to let the printer
enter ink ejection mode.


Make sure no cartridges are installed during transportation. After transportation, the printer
automatically enters the initial ink-charging mode when you turn on the printer and install ink
cartridges, as long as the printer was properly prepared for transportation.


Use only recommended tools for disassembling, assembling, or adjusting the printer.


Apply lubricants and adhesives as specified (See Chapter 6 for details).


Make all required adjustments when you disassemble the printer (See Chapter 4 for details).

Tools

Make sure you use the tools listed in Table 3-1.
Philips screwdriver #1
Phillips screwdriver #2
Standard screwdriver
Nippers
Thickness gauge set
Tweezers
Paper quantity detector adjusting tool
Paper width detector position tool (A4 In)
Paper width detector position tool (A4 Out)
Paper width detector position tool (B4 In)
Paper width detector position tool (B4 Out)
Paper width detector position tool (Letter In)
Paper width detector position tool (Letter Out)
B4 size tool
Letter size tool
3-2
CAUTION
Table 3-1. Tools
Tools Distributor Part No.
EPSON B743800400
EPSON B743800200
EPSON B743000100
EPSON B740500100
EPSON B776702201
EPSON B741000100
EPSON 103679400
EPSON 103679500
EPSON 103679600
EPSON 103679900
EPSON 103680000
EPSON 103680100
EPSON 103680200
EPSON 103679700
EPSON 103679800
EPSON Stylus Color 3000 Service Manual