Epson STYLUS COLOR 3000 Service Manual page 136

3. Printing is abnormal.
START
Run a self-test.
Does the
self-test print?
YES
Is the
printout
abnormal?
YES
Repeat the cleaning
sequence or perform an
initial ink charge operation.
Is the problem
corrected?
YES
END
EPSON Stylus Color 3000 Service Manual
NO
NO
Make adjustments.
(Refer to Chapter 4.)
NO
Proceed to Section 5.5,
Printer Mechanism Repair.
Is the problem
corrected?
YES
Figure 5-4. Flowchart (3)
EPSON Stylus COLOR 3000
Are all
connector
cables connected to
the main board
properly?
NO
Connect them properly.
YES
Is the problem
corrected?
NO
Check the motors and
printheads. If they are
normal, replace the main
control board.
NO
END
YES
5-7