Table of Contents
Advertisement
1.7.7
RAN Up Converter (RUC2.X or RUC3) Module
The RAN Up Converter (RUC2.X or RUC3) Module is a cPCI electronic module that takes
Digitized Intermediate Frequency (DIF) signals from a DIF signal generated by the SIF and
converts the signals to RF (PCS, Cellular, SMR A, and SMR B frequency bands). Each module
supports two simultaneous bands via wideband outputs. The RUC also provides clocking for its
neighboring RDC. For module faceplate and callouts, see
Table 9. RAN Up Converter Module Faceplate Components
REF #
DESIGNATION
1
CH 1/3 OUT
2
COM 1/3
3
COM 2/4
4
PA CNTL 1/3
CHANNEL
1
1/3 OUT
CHANNEL
8
2/4 OUT
Figure 14. RAN Up Converter Module Faceplate
DEVICE
FUNCTIONAL DESCRIPTION
SMA connector
Channel 1/3 Out*
Yellow LED
COM Port 1/3. Turns yellow when DIF is locked to SIF channel
1 or 3*
Yellow LED
COM Port 2/4. Turns yellow when DIF is locked to SIF channel
2 or 4*
I2C flatpack
PA Control Channel 1 or 3. Outputs control data to the PIC card
connector
on the PAA for the channel being provided (using cable
1955000P079)*
ADCP-75-210 • Issue 1 • March 2007
Figure 14
and
Table
2
COM 1/3
3
COM 2/4
4
PA CNTL 1/3
5
PA CNTL 2/4
6
FAULT LED
7
POWER LED
21234-A
© 2007, ADC Telecommunications, Inc.
9.
Page 19
Advertisement
Table of Contents
