ADC Gas Discharge Tube ComProtect Spec Sheet

ComProtect
Single-Pair Protectors For Series 2 Switching Blocks
ADC's ComProtect 2/1 CP TP280A1 GDT
®
(Gas Discharge Tube) single-pair protection
module, when combined with ADC's LSA-
PLUS Series 2 connectivity, is a high-density
®
system that increases the pair capacity that
can be supported in OSP cabinets. The
ComProtect GDT system provides up to a
50% space savings over traditional systems
utilizing separate cross-connect and protection
fields. By reducing the number of connection
points, the ComProtect GDT system improves
technician productivity and reduces failure
rates. The ComProtect GDT module has been
designed for protecting high bandwidth
circuits, like VDSL2.
Applications
• OSP protected blocks, designed
for protecting circuits entering
or leaving cabinets
• T1 protected input and output circuits
• Building entrance protection terminal blocks
w w w . a d c . c o m
Gas Discharge Tube
®
• + 1 - 9 5 2 - 9 3 8 - 8 0 8 0

Features and Benefits:

• Meets applicable GR-1361-CORE,
GR-63-CORE, GR-78-CORE,
GR-1252-CORE, and SR-NWT-2759
Telcordia standards
• Meets the "High-Speed Digital Networks
Operating up to 100 MHz" requirements
of Telcordia GR-974-CORE
• Listed to UL 497
• Meets NEBS Level 3 compliance
• Supports VDSL2 transmission
• Quick VDSL2 migration for
upgrading from ADSL2+ circuits
by simply changing out solid-state
ComProtect to ComProtect GDT
• Cross-connection and protection
in the same footprint
• Termination Block with integrated
protection
• Provides protection to your FTTN network
elements against overvoltage surges
• ComProtect utilizes LSA-PLUS technology
therefore reducing network failure
frequency rates.
• LSA-PLUS technology offers monitoring,
look-both-ways testing, without lifting
cross-connect jumpers
• Gel filled version available to provide
enhanced protection in harsh
environments
• 1 - 8 0 0 - 3 6 6 - 3 8 9 1