Table of Contents
Advertisement
ANTENNA
ANTENNA
MOUNTING
BRACKET
GROUND WIRE
TO ANTENNA
PRIMARY
POWER
SECONDARY
POWER
FIBER
2 IN. SCHEDULE 40
CONDUIT FOR POWER IN
CARLTON PT. NO.
49011-010 OR
EQUIVALENT
27.5 IN.
(69.85 CM)
JUNCTION
BOX
#6 AWG COPPER
GROUND WIRE TO
METER BOX, RAN,
AND ANTENNA
COPPER
GROUND
ROD
2.5.2
Pole Loading Analysis
A pole loading analysis should be performed before the RAN is mounted on the pole to verify
that the pole can support the weight of the RAN in various conditions. The analysis should take
into account the pole top antenna, the RAN and batteries, and the possibility of an expansion
RAN with batteries.
100 IN.
(254 CM)
1.5 IN. SCHEDULE 40
38.6 FT.
(11.8 M)
TYPICAL
10 FT. (3 M)
TYPICAL
7 FT. (2.1 M)
TYPICAL
SIDE
VIEW
Figure 25. Typical Pole-Mount Installation
Table 19
lists the weights of various NXD components and configurations.
ANTENNA
(5 REQUIRED)
SECONDARY POWER LINE
POLE RISER FOR
FIBER OPTIC LINES
CARLTON PT. NO.
59010N OR
EQUIVALENT
31.25 IN.
(79.4 CM)
FRONT
VIEW
© 2007, ADC Telecommunications, Inc.
ADCP-75-210 • Issue 1 • March 2007
RF CABLES
TO RAN
PRIMARY POWER
FIBER OPTIC LINE
FIBER SPLICE CAN
3 IN. SCHEDULE 40
CONDUIT FOR
RF CABLES
CARLTON PT. NO.
49013-010 OR
EQUIVALENT
21285-A
Page 35
Advertisement
Table of Contents
