Table of Contents
Advertisement
60
To adjust the working height:
1.
Loosen the screws (2) on both sides of the stand.
2.
Adjust the tabletop (1) to the desired height.
Important
Ensure that the tabletop is level.
3.
Tighten the screws (2).
6.6
Adjusting the pedal
Fig. 32: Adjusting the pedal
①
(1) - Connecting piece on
the pull rod
To adjust the pedal:
1.
Adjust the pedal (3) so that it is centered relative to the axis
of the needle.
2.
Adjust the connecting piece of the pull rod (4) so that the
pedal (3) has the desired angular position.
3.
Adjust the connecting piece of the pull rod (1) so that the
pedal (2) has the desired angular position.
②
③
(2) - Pedal
Operating Instructions 969 PURE - 00.0 - 04/2020
Setup
④
Advertisement
Table of Contents
