Table of Contents
Advertisement
Operation
Operating Instructions 969 PURE - 00.0 - 04/2020
To wind the hook thread:
1.
Fit the thread reel on the reel stand.
2.
Insert the thread from the rear to the front through the slot
in the holder of the tension (2).
3.
Feed the thread clockwise around the tension (2).
4.
Insert the thread from the front to the rear through the slot
in the holder of the tension (2).
5.
Insert the thread through the guide (3).
6.
Clamp the thread under the thread-pulling knife (4) and tear
off the protruding remaining thread.
Fig. 7: Winding the hook thread (2)
⑤
⑥
⑦
(5) - Winder lever
(6) - Bobbin shaft
7.
Fit the bobbin (7) onto bobbin shaft (6) and drive dog (8).
8.
Switch on the machine.
9.
Press the bobbin lever (5) to the I position.
(7) - Bobbin
(8) - Drive dog
⑧
25
Advertisement
Table of Contents
