DURKOPP ADLER 969 PURE Operating Instructions Manual page 22

20
Disturbance after inserting a thicker needle:
• Damage to the hook tip
• Damage to the needle
• Damage to the loop support
Disturbance after inserting a shorter needle:
• Damage to the hook tip
• Damage to the needle
• Skip stitches
After inserting a longer needle:
• Damage to the hook tip
• Damage to the needle
Skip stitches
Fig. 3: Inserting/changing the needle
①
②
③
(1) - Needle bar
(2) - Screws
To insert or change the needle:
1. Turn the handwheel until the needle (3) reaches the upper
end position.
2. Loosen the screws (2).
3. Pull the needle (3) down and out.
4. Insert the new needle.
Important
Align the needle in such a way that the groove (4) faces the hook.
5. Tighten the screws (2).
(3) - Needle
(4) - Groove
Operating Instructions 969 PURE - 00.0 - 04/2020
Operation
④