DURKOPP ADLER 969 PURE Operating Instructions Manual page 29

Operation
Operating Instructions 969 PURE - 00.0 - 04/2020
Fig. 9: Changing the bobbin (2)
(3) - Latch
3. Press the latch (3).
 The bobbin case (4) is tilted out, causing the interior spring
to push the bobbin up and out.
Fig. 10: Changing the bobbin (3)
④
⑤
⑥
⑦
(4) - Bobbin case
(5) - Slot in the bobbin case
(6) - Slot in the spring
4. Remove the empty bobbin (8).
5. Insert the full bobbin into the bobbin case (4).
Make sure that the driver hole (9) is pointing to the bobbin
case.
6. Depress the bobbin case (4) until the latch (3) engages.
7. Feed the hook thread through the slot (5).
(4) - Bobbin case
(7) - Compression spring
(8) - Bobbin
(9) - Driver hole
③
④
⑨
⑧
27