Setup
Operating Instructions 969 PURE - 00.0 - 04/2020
Important
Turn the feet (3) so that the stand has even contact with the ground.
6.3.2
Assembling the swivel stand
Fig. 26: Assembling the swivel stand
②
③
④
⑤
⑥
⑦
(1) - Rear panel
(2) - Swiveling tabletop
holder
(3) - Swiveling side panel
(4) - Oil can holder
(5) - Cross member
(6) - Hinge
(7) - Left side panel
To assemble the swivel stand:
1.
Screw the side panels (13) to the rear panel (1) and the cross
member (8).
2.
Screw the bolted parts to the left side panel (7) and the cross
member (5).
3.
Tighten the head section (15).
①
⑧
⑨
(8) - Cross member
(9) - Setpoint device holder
(10) - Cross strut
(11) - Hinge
(12) - Foot
(13) - Side panels
(14) - Drawer holder
(15) - Head section
⑮
⑭
⑬
⑫
⑩
⑪
53