Table of Contents
Advertisement
54
4.
Tighten the rear panel (1) using all screws.
5.
Tighten the hinge (11) and the swiveling tabletop holder (2).
6.
Tighten the hinge (6).
7.
Tighten the setpoint device holder (9).
8.
Rotate the stand and tighten the cross member (10) to
the outer side panels.
Important
Turn the feet (12) so that the stand has even contact with
the ground.
9.
Tighten the oil can holder (4) on the rear at the left side
panel (7).
10. Attach the drawer holder (14) to the right side panel (13).
Operating Instructions 969 PURE - 00.0 - 04/2020
Setup
Advertisement
Table of Contents
