Table of Contents
Advertisement
58
6.4.4
Assembling the swiveling tabletop
Fig. 30: Assembling the swiveling tabletop
①
(1) - Drawer
(2) - Holes
(3) - Swiveling tabletop holder
(4) - Left side panel
To assemble the tabletop:
1.
Tighten the stand and the swiveling tabletop holder (3) in such
a way that the holes (2) are aligned with the tabletop.
2.
Tighten the foot button (8) as close to the left side panel (4)
as possible.
3.
Press the lugs at the end of the pull rod (6) onto the round pin
of the setpoint device (5) and the pedal (8).
4.
Tighten the pedal (8) as close to the foot button (7) as possible.
5.
Assemble the drawer (1) at the designated holder.
②
③
(5) - Setpoint device
(6) - Pull rod
(7) - Foot button
(8) - Pedal
Operating Instructions 969 PURE - 00.0 - 04/2020
Setup
⑧
⑦
⑥
⑤
④
Advertisement
Table of Contents
