Transport Packing Of Assembled Machine; Assembling The Stand Assembling The Stand Components - DURKOPP ADLER 887 Series Operating Instructions Manual

2

Transport packing of assembled machine

3 Assembling the stand
3.1 Assembling the stand components
4
If the machine is supplied in assembled condition, the following
transport packing must be removed:
–
Safety straps and wooden battens on the machine head and stand.
–
Mount the frame according to the picture. Mount the pedal (1)
provisionally to the cross strut frame (3). Its position will be
adjusted after the whole machine is complete.
–
Adjust the screw (2) so that the stand is stable.
1
2
3