Table of Contents
Advertisement
Check List
√
The media tank(s) has been properly loaded with gravel and media.
√
The drain line has been properly installed.
All option kits have been properly installed.
√
√
The system has been properly piped and tubed.
√
Each media tank has been backwashed manually.
The GBE Controller(s) have been correctly and completely wired, including differential pressure switches if equipped.
√
√
All GBE Controllers have been properly programmed and are active (power on).
√
All manual isolation valves are open and system by-pass valves are closed.
Clean up the unit and the installation site, removing any soldering or pipe threading residues from the equipment with
√
a damp towel.
√
Explain the operation of the system to the customer.
Care and Cleaning
Protect the operation and appearance of the water filter by following these precautions:
1.
Do not place heavy objects on top of the filter cover.
2.
Use only mild soap and warm water to clean the exterior of the unit. Never use harsh abrasive cleaners or com-
pounds which contain acid or bleach. Culligan recommends Simple Green or an equivalent cleaner.
3.
Protect the conditioner and drain line from freezing temperatures.
Cat. No. 01024514
Final Startup
45
Hide quick links:
Advertisement
Table of Contents
