9.26. CR16 MECHANISM ASSEMBLY
PROCEDURE
The following specified greases and/or oil must be applied
when some specific parts are changed.
1. Floil grease (VFK1298) : The floil grease must be
applied to tray, tray (L) and tray (R).
2. Hanarl oil (VFK1700) : The hanarl oil must be applied to
any parts with grease other than the said parts.
· Follow the (Step 1) - (Step 6) of Item 9.4.
· Follow the (Step 1) - (Step 2) of Item 9.5.
· Follow the (Step 1) - (Step 4) of Item 9.7.
· Follow the (Step 1) - (Step 2) of Item 9.11.
· Follow the (Step 1) - (Step 5) of Item 9.14.
· Follow the (Step 1) - (Step 10) of Item 9.25.2.
· Follow the (Step 1) - (Step 4) of Item 9.25.3.
· Follow the (Step 1) - (Step 22) of Item 9.25.4.
49
SA-PM53E / SA-PM53EB / SA-PM53EG