Self-Diagnosis & Special Mode Setting; Special Mode Table - Panasonic SA-PM53E Service Manual

SA-PM53E / SA-PM53EB / SA-PM53EG
8 Self-Diagnosis & Special Mode Setting
This unit is equipped with features of self-diagnostic & special mode setting for checking the functions & reliability.
Special Note : Checking of the reliability (ageing) & changer operation must be carry out to ensure good working condition in unit.
8.1.

Special Mode Table

Below is the various special modes for checking:-
Item
Mode Name Description
Self -Diagnostic To enter into self
Mode diagnostic checking for
main unit.
CD Changer To determine the
Reliability Test reliability of CD Changer
Unit.
(For more information,
refer to section 8.1.2)
Doctor Mode To enter into Doctor
Mode for checking of
various items and
displaying EEPROM and
firmware version.
(For more information,
refer to section 8.1.3)
Note: The micro-
processor version as
shown is an example. It
will be revise when there
is an updates.
Cold Start To activate cold start
ipon next AC power up.
FL Display Test To check the FL
segments display (All
segments will light up)
CD to TAPE To Inspect the recording
Recording Test process from CD to
Mode TAPE for the unit
(For more information,
refer to section 8.1.4)
Tape Recording To Inspect the Tape
and Playing recording and playing is
process for unit.
(For more information,
refer to section 8.1.5)
FL Display
1.
2.
1. The Check Sum of EEPROM and firmware
version will be display for 1 sec.
* ROM correction
** Firmware version No:
Note: This test do not work when selector is in
Tuner.
14
Key Operation
Front Key
1. Select [ ] for TAPE mode (Ensure
no tape is inserted).
2. Press and hold [ ]button for 3
seconds follow by [
To exit, press
unit or remote control.
In doctor Mode:
1. Press [2] button on remote control..
To exit, press
unit or remote control.
In any mode:
1. Press [ ] button on main unit follow
by [4] and [7] on remote control.
To exit, press [ENTER] button on remote
control or button on main unit or
remote control.
In doctor mode:
1. Press [4] button on remote control.
To exit, press [ENTER] button on remote
control or button on main unit or
remote control.
In doctor mode:
1. Press [DIMMER] button on remote control.
To exit, press [ENTER] button on remote
control or button on main unit or
remote control.
In doctor mode:
1. Set to CD mode
2. Press [5] button on remote control.
To exit, press [ENTER] button on remote
control or button on main unit or
remote control.
In doctor mode:
1. Press [6] button on remote control.
To exit, press [ENTER] button on remote
control or button on main unit or
remote control.
].
button on main
button on main