Panasonic SA-PM53E Service Manual page 15

Item
Mode Name Description
Volume Setting To Forced Volume
Setting.
· BASS TREBLE set to
0dB.
· H.BASS is off.
TPS To check FF TPS for
deck.
(For more information,
refer to section 8.1.6)
CD Tray and To check CD Tray and
Tape Door Open Tape Door Open.
· BASS TREBLE set to
0dB.
· H.BASS is off.
· CD tray and Cassette
cover shall open
simultaneously.
Changer To check the CD
Operation Changer Operation.
(For more information,
refer to section 8.1.7)
1. Tray 1 load, tray 2
open then close.
2. Tray 1 load, tray 3
open then close.
3. Tray 1 load, tray 4
open then close.
4. Tray 1 load, tray 5
open then close.
5. CD check mode and
then close.
6. Tray 1 load.
7. After the above
process, [CHNGR_OK]
shall be displayed. If
there is no problems.
Error codes will display if
errors occurs.
8.1.1. Cassette Mechanism Self-Diagnostic Mode
Below is information on the checking of cassette deck mechanism
No. Operation Procedures
1 C-mecha Abnormal Detection shall be
executed for DECK 1 only.
2 [ ] key is pressed, after loading in a
NORMAL type cassette with the recording tab
on the left side removed.
3 [ ] key is pressed, after loading a
NORMAL, CrO2, METAL type cassette with
the recording tab on the right side removed.
FL Display
1.
2.
3.
Check that all DECK mechanism leaf SW is in OFF state.
FF shall be executed for 2 sec, after which STOP.
Check the following.
{ F.REC INH SW } is OFF
{ R.REC INH SW } is ON
{ HALF SW } is ON
Reel pulse toggles between H & L.
REW shall be executed for 2 sec, after which STOP.
Check the following.
{ F.REC INH SW } is ON
{ R.REC INH SW } is OFF
{ HALF SW } is ON
Reel pulse toggles between H & L.
15
SA-PM53E / SA-PM53EB / SA-PM53EG
Key Operation
Front Key
In doctor mode:
1. Press [7] button on remote control.
2. Press [8] button on remote control.
3. Press [9] button on remote control.
To exit, press [ENTER] button on remote
control or
remote control.
In doctor mode:
1. Press [ ] button on remote
control.
To exit, press [ENTER] button on remote
control or
remote control.
In doctor mode:
1. Press [1] button on remote control.
To exit, press [ENTER] button on remote
control or
remote control.
In doctor mode:
1. Press [DISC] button on remote control.
To exit, press [ENTER] button on remote
control or
remote control.
Micon operation & processing
button on main unit or
button on main unit or
button on main unit or
button on main unit or